SPHAERA PVC BASE 50

We have created a specific stainless steel profile with a Duralene® core which guarantees it’s adaptability to the hull. His patented process prevents deformation and allows bending on difficult angles with a minimal effort. The pvc base is supplied in coils of the desired length. This avoids unsightly joints, breaks and misalignments.

FEATURES

HOW IT IS SOLD

3 mt Stainless Steel bars as standard
2,60 mt Stainless Steel bars UPS shippable by request
PVC Base produced in custom lenghts

RAW MATERIALS

S/S 316L: Aisi S/S 316L
Core: Core in Duralene
BASE: PVC for marine application 83 shore available in black – white- grey

PRODUCT CATEGORIES

This product belongs to:

Boat Rub Rail
FENDER PROFILES – Sphaera

Request information

ITEM	DESCRIPTON	MIN BENDING RADIUS	WEIGHT	PACKING	PACKING	COLORS
Art.: 130-130-150	Sphaera 50 mm S/S 316L bars	100 mm – 3-7/8″	1200 g/mt – 38 oz/yd	tube	12 bars of 3 mt/9′ or 12 bars 2.60 mt/8.5 ft minimum
Art.: 130-130-250	Sphaera 50 pvc base + S/S 316L	100 mm – 3-7/8″	2600 g/mt – 83 oz/yd	tube+coil	12 bars of 3 mt/9′ or 12 bars 2.60 mt/8.5 ft minimum
Art.: 130-130-069	PVC Slim Base for Sphaera 50 mm	100 mm – 3-7/8″	210 gr/mt – 6 oz/yd	coil	custom lenghts	white-black-grey
Art.: 130-130-070	PVC base mm 70 Sphaera 50 mm standard	100 mm – 3-7/8″	1400 g/mt – 45 oz/yd	coil	custom lenghts	white-black-grey
Art.: 130-130-071	PVC base mm 70 Sphaera 50 mm for flat surfaces	100 mm – 3-7/8″	1390 g/mt – 45 oz/yd	coil	custom lenghts	white-black-grey
Art.: 130-500-150	Joints Sphaera mm 50			single	1 piece each bar – recommended
Art.: 130-500-750	End Caps Kit Sphaera mm 50 fitted with the pvc base			kit	1 kit left and right
Art.: 130-500-650	End Cap Sphaera mm 50 fitted without pvc base			single	1 piece

TECHNICAL DRAWING

INSTALLATION

SPHAERA PVC BASE 50

Request information

Repair the rub rails