SPHAERA PVC BASE 35

We have created a specific stainless steel profile with a Duralene® core which guarantees it’s adaptability to the hull. His patented process prevents deformation and allows bending on difficult angles with a minimal effort. The pvc base is supplied in coils of the desired length. This avoids unsightly joints, breaks and misalignments.

FEATURES

HOW IT IS SOLD

3 mt Stainless Steel bars as standard
2,60 mt Stainless Steel bars UPS shippable by request
PVC Base produced in custom lenghts

RAW MATERIALS

S/S 316L: Aisi S/S 316L
Core: Core in Duralene
BASE: PVC for marine application 83 shore available in black – white- grey

PRODUCT CATEGORIES

This product belongs to:

Boat Rub Rail
FENDER PROFILES – Sphaera

Request information

ITEM	DESCRIPTON	MIN BENDING RADIUS	WEIGHT	PACKING	PACKING	COLORS
Art.: 130-130-135	Sphaera 35 mm S/S 316L bars	75 mm – 2-7/8″	830 g/mt – 26 oz/yd	tube	12 bars of 3 mt/9′ or 12 bars 2.60 mt/8.5 ft minimum
Art.: 130-130-230	Sphaera 35 pvc base + S/S 316L	75 mm – 2-7/8″	1476 g/mt – 47 oz/yd	tube+coil	12 bars of 3 mt/9′ or 12 bars 2.60 mt/8.5 ft minimum
Art.: 130-130-049	PVC Slim Base for Sphaera 35 mm	75 mm – 2-7/8″	160 gr/mt – 5 oz/yd	coil	custom lenghts	white-black-grey
Art.: 130-130-050	PVC base mm 50 Sphaera 35 mm standard	75 mm – 2-7/8″	646 g/mt – 21 oz/yd	coil	custom lenghts	white-black-grey
Art.: 130-130-051	PVC base mm 50 Sphaera 35 mm for flat surfaces	75 mm – 2-7/8″	640 g/mt – 21 oz/yd	coil	custom lenghts	white-black-grey
Art.: 130-500-135	Joints Sphaera mm 35			single	1 piece each bar – recommended
Art.: 130-500-735	End Caps Kit Sphaera mm 35 fitted with the pvc base			kit	1 kit left and right
Art.: 130-500-635	End Cap Sphaera mm 35 fitted without pvc base			single	1 piece

TECHNICAL DRAWING

INSTALLATION

SPHAERA PVC BASE 35

Request information

Repair the rub rails