SPHAERA SLIM BASE 65

We have created a specific stainless steel profile with a Duralene® core which guarantees it’s adaptability to the hull. His patented process prevents deformation and allows bending on difficult angles with a minimal effort. The pvc base is supplied in coils of the desired length. This avoids unsightly joints, breaks and misalignments.

FEATURES

HOW IT IS SOLD

3 mt Stainless Steel bars as standard
2,60 mt Stainless Steel bars UPS shippable by request
PVC Base produced in custom lenghts

RAW MATERIALS

S/S 316L: Aisi S/S 316L
Core: Core in Duralene
BASE: PVC for marine application 83 shore available in black – white- grey

PRODUCT CATEGORIES

This product belongs to:

Boat Rub Rail
FENDER PROFILES – Sphaera

Request information

ITEM	DESCRIPTON	MIN BENDING RADIUS	WEIGHT	PACKING	PACKING	COLORS
Art.: 130-130-165	Sphaera 65 mm S/S 316L bars	100 mm – 3-7/8″	1535 g/mt – 49 oz/yd	tube	12 bars of 3 mt/9′ or 12 bars 2.60 mt/8.5 ft minimum
Art.: 130-130-265	Sphaera 65 pvc base + S/S 316L	100 mm – 3-7/8″	3170 g/mt – 101 oz/yd	tube+coil	12 bars of 3 mt/9′ or 12 bars 2.60 mt/8.5 ft minimum
Art.: 130-130-089	PVC Slim Base for Sphaera 65 mm	100 mm – 3-7/8″	250 gr/mt – 8 oz/yd	coil	custom lenghts	white-black-grey
Art.: 130-130-090	PVC base mm 90 Sphaera 65 mm standard	100 mm – 3-7/8″	1635 g/mt – 52 oz/yd	coil	custom lenghts	white-black-grey
Art.: 130-130-091	PVC base mm 90 Sphaera 65 mm for flat surfaces	100 mm – 3-7/8″	1630 g/mt – 51 oz/yd	coil	custom lenghts	white-black-grey
Art.: 130-500-165	Joints Sphaera mm 65			single	1 piece each bar – recommended
Art.: 130-500-765	End Caps Kit Sphaera mm 65 fitted with the pvc base			kit	1 kit left and right
Art.: 130-500-665	End Cap Sphaera mm 65 fitted without pvc base			single	1 piece

INSTALLATION

TECHNICAL DRAWING

SPHAERA SLIM BASE 65

Request information

Repair the rub rails